Compare free quotes from local and nationwide heat pump installers...

Dimplex Indoor Air Source Heat Pumps

Dimplex is a leading developer of electric space and water heating solutions based in the UK.

The company has five ranges of indoor air source heat pumps to meet your domestic heating needs.

LIK 8 ME

A single phase model:

LIK 8 ME – 8kW, CoP 3.8

This air source heat pump is suitable for use with underfloor heating, radiator systems and to provide domestic hot water.

Has variable heating water flow temperatures from 35 degrees Celsius to 58 degrees Celsius, weather compensated. Operational temperatures are from minus 25 degrees Celsius to 35 degrees Celsius plus.

LIK 8 ME includes a 50L buffer tank, 2kW immersion heater, circulating pump and expansion vessel, all fully integrated, saving valuable space and simplifying installation.

LI 11 ME

A single phase model:

LI 11 ME – 11kW, CoP 4.2

This appliance can be used with underfloor heating, radiator systems and to provide domestic hot water.

Variable heating water flow temperatures are from 35 degrees Celsius to 58 degrees Celsius, and operational temperatures are from minus 25 degrees Celsius to 35 degrees Celsius plus.

Additional features are air ducting kits, a space saving buffer tank and an auto adaptive frost cycle.

LI TE range

Comes in four three phase models:

LI 16 TE – 16kW, CoP 3.1 to 3.6
LI 20 TE – 20kW, CoP 3.1 to 3.6
LI 24 TE – 24kW, CoP 3.1 to 3.6
LI 28 TE – 28kW, CoP 3.1 to 3.6

All LI TE products are suitable for use with underfloor heating, radiator systems and to provide domestic hot water.

Variable heating water flow temperatures are from 35 degrees Celsius to 58 degrees Celsius, and operational temperatures are from minus 25 degrees Celsius to 35 degrees Celsius plus.

These products also offer two performance capacities, an integrated heat pump manager with removable control panel, sound insulation and frost protection.

LI 40 A S

A single phase model:

LI 40 AS – 40kW, CoP 4.4

The LI 40 A S is compatible with underfloor heating, radiator systems and to provide domestic hot water.

Variable heating water flow temperatures are from 35 degrees Celsius to 58 degrees Celsius, and operational temperatures are from minus 25 degrees Celsius to 35 degrees Celsius plus.

This product has exceptional CoPs, due to a higher performance evaporator. Other advantageous features are low running noise, intelligent load switching between compressors to maximise compressor life and its space saving design.

LIH TE range

Comes in two three phase models:

LIH 22 TE – 22kW, CoP 3.4 to 3.8
LIH 26 TE – 26kW, CoP 3.4 to 3.8

These indoor air source heat pumps are suitable for use with underfloor heating, radiator systems and to provide domestic hot water.

Variable heating water flow temperatures are from 35 degrees Celsius to 75 degrees Celsius, and operational temperatures are from minus 25 degrees Celsius to 35 degrees Celsius plus.

Additional features include twin compressors for high capacity output, low noise running and a wall mounted WPM heat manager pump.

Compare free quotes from local and nationwide heat pump installers...

Leave a Reply

Your email address will not be published. Required fields are marked *